With right sides together, mark 4" down with marker. Skip 2" and mark again. Do this on the left and right. Stitch down 4", skip 2 ", stitch all the way around. Clip corners at bottom. Press seams open.
Press seams open all the way around. You will then need to turn ONE bag inside out. Press. Insert one bag inside the other as shown above, contrasting fabrics facing.
Line up the bags by pinning at the seams shown here.
Stitch around the top of the bag 1/4", leaving approximately 3" open in order to turn. Then, pull one bag through the opening. Then give a good press.
Give it a good Press here.
Then, push one bag inside the other one.
Press again after one bag is inside.
Topstitch all the way around. This closes the 3" hole.
Remember, there's a 2" opening on each side. You'll pin here and then sew the channel all the way around. You'll sew around twice, creating the channel. I reinforce at the channel openings because that is where the bag will wear after the drawstrings are inserted.
Press the drawstrings in half.
Then, press the edges toward the center, just enough...
Press again. Finish off the ends however you choose, then stitch all the way to the end. One down, one to go!
I use a bodkin to pull the drawstrings through the channel. Feed one string through...returning with the end, back to your starting place. Then, insert the other drawstring from the other side. This is what makes it a TRUE DRAWSTRING BAG.
All done!
No comments:
Post a Comment